fix monitor lcd screen replacement replacement lcd flat tire repair projector replacement lamp lcd scratch
TFT LCDs are a variant of liquid crystal display which use thin-film transistor technology to improve their image quality. TFT LCDs are one type of active matrix LCD, though this is usually synonymous with them. They are used in both flat panel displays and projectors. In computing, TFT monitors are rapidly displacing competing CRT technology, and are commonly available in sizes from 30 to 77 cm (~12 to 30 inches). As of 2005, they have also made inroads on the television market. The phosphors in a plasma display give off colored light when they are excited. Every pixel is made up of three separate subpixel cells, each with different colored phosphors. One subpixel has a red light phosphor, one subpixel has a green light phosphor and one subpixel has a blue light phosphor. These colors blend together to create the overall color of the pixel. By varying the pulses of current flowing through the different cells, the control system can increase or decrease the intensity of each subpixel color to create hundreds of different combinations of red, green and blue. In this way, the control system can produce colors across the entire visible spectrum. Plasma displays use the same phosphors as CRTs, accounting for the extremely accurate color reproduction. Techniques for color graphics The Plasma display panel was invented at the University of Illinois at Urbana-Champaign by Donald L. Bitzer and H. Gene Slottow in 1964 for the PLATO Computer System. The original monochrome (usually orange or green) panels enjoyed a surge of popularity in the early 1970s because the displays were rugged and needed neither memory nor refresh circuitry. There followed a long period of sales decline in the late 1970s as semiconductor memory made CRT displays incredibly cheap. Nonetheless, plasma's relatively large screen size and thin profile made the displays attractive for high-profile placement such as lobbies and stock exchanges. In 1983, IBM introduced a 19" orange on black monochrome display (model 3290 'information panel') which was able to show four simultaneous 3270 virtual machine (VM) terminal sessions. In 1992, Fujitsu introduced the world's first 21-inch full color display. It was a hybrid based on the plasma display created at the University of Illinois at Urbana-Champaign and NHK STRL, achieving superior brightness. A diagram of the Pixel layout
A French company, Nemoptic, has developed another zero-power, paper-like LCD technology which has been mass-produced in Taiwan since July 2003. This technology is intended for use in low-power mobile applications such as e-books and wearable computers. Zero-power LCDs are in competition with electronic paper. In 1969, the twisted nematic field effect in liquid crystals was discovered by James Fergason at Kent State University in the USA, and in 1971 his company ILIXCO (now LXD Incorporated) produced the first LCDs based on it, which soon superseded the poor-quality DSM types. * LCD screens occasionally suffer from image persistence, which is similar to screen burn on CRT displays. LCD technology still has a few drawbacks in comparison to some other display technologies: Raw LCD TFT panels are usually factory-sorted into three categories, with regard to the number of dead pixels, backlight evenness and general product quality. Additionally, there may be up to +/- 2ms maximum response time differences between individual panels that came off the same assembly line on the same day. The poorest-performing screens are then sold to no-name vendors or used in "value" TFT monitors (often marked with letter V behind the type number), the medium performers are incorporated in gamer-oriented or home office bound TFT displays (sometimes marked with the capital letter S), and the best screens are usually reserved for use in "professional" grade TFT monitors (usually marked with letter P or S after their type number). Types
Menu:
We are laptop repair specialists!
We have qualified, A+ Certified Technicians ready to diagnose your laptop!
Whether you need a new part, or simply do not know why your laptop is acting up, feel free to give our technicians a call to give you an estimate. MORE
Our A+ Certified Technician will diagnose your laptop completely, and inform you of the problem. Estimated parts and labor to fix it will be given upon completion of testing... MORE
Enlarge Contrast ratio indicates the difference between the brightest part of a picture and the darkest part of a picture, measured in discrete steps, at any given moment. The implication is that a higher contrast ratio means more picture detail. Contrast ratios for plasma displays are often advertised as high as 5000:1. On the surface, this is a great thing. In reality, there are no standardized tests for contrast ratio, meaning each manufacturer can publish virtually any number that they like. To illustrate, some manufacturers will measure contrast with the front glass removed, which accounts for some of the wild claims regarding their advertised ratios. For reference, the page you're reading now (on a computer monitor) is actually about 50:1. A printed page is about 80:1. A really good print at a movie theater will be about 500:1 IPS (In-Plane Switching) was developed by Hitachi in 1996 to improve on the poor viewing angles and color reproduction of TN panels. These improvements came at a loss of response time, which was initially on the order of 50ms. IPS panels were also extremely expensive.
MVA (Multi-domain Vertical Alignment) was originally developed in 1998 by Fujitsu as a compromise between TN and IPS. It achieved fast pixel response (at the time), wide viewing angles, and high contrast at the cost of brightness and color reproduction. Plasma displays are bright (1000 lx or higher for the module), have a wide color gamut, and can be produced in fairly large sizes, up to 260 cm (102 inches) diagonally. They have a very high "dark-room" contrast, creating the "perfect black" desirable for watching movies. The display panel is only 6 cm (2 1/2 inches) thick, while the total thickness, including electronics, is less than 10 cm (4 inches). Plasma displays use as much power per square meter as a CRT or an AMLCD television; in 2004 the cost has come down to US$1900 or less for the popular 42 inch (107 cm) diagonal size, making it very attractive for home-theatre use. Real life measurements of plasma power consumption find it to be much less than that normally quoted by manufacturers. Nominal measuments indicate 150 Watts for a 50" screen. The lifetime of the latest generation of PDPs is estimated at 60,000 hours to half life when displaying video. Half life is the point where the picture has degraded to half of its original brightness, which is considered the end of the functional life of the display. So if you use it at an average of 2-1/2 hours a day, the PDP will last approximately 65 years. The layout of the circuit is very similar to the one used in DRAM computer memory but rather than being built using silicon wafers, the whole structure needs to be created on glass. Many of the processing techniques used in creating circuits on silicon require temperatures in excess of the melting point of glass. The silicon substrate of normal semiconductors is grown from liquid silicon to produce a large single crystal with excellent properties for transistors. The silicon layer for TFT LCDs is deposited from Silane gas to produce an amorphic or polycrystalline silicon layer which is far less suitable for producing high grade transistors. To ionize the gas in a color panel, the plasma display's computer charges the electrodes that intersect at that cell thousands of times in a small fraction of a second, charging each cell in turn. When the intersecting electrodes are charged (with a voltage difference between them), an electric current flows through the gas in the cell. The current creates a rapid flow of charged particles, which stimulates the gas atoms to release ultraviolet photons.